non-adhesive jar/bottle labels?

« Back to Previous Page
0
Posted by Camille Cloutier (Questions: 3, Answers: 16)
Asked on April 6, 2011 7:38 pm
294056 Views

I'm looking for a method to label mason jars or bottles that does NOT involve adhesive. No sticker-type labels. I don't have the patience to remove adhesive labels, so I'm trying to avoid needing to do that. So I'm looking for some combination of rubberband+cardstock or maybe someone could recommend a pen that writes well on glass and is long-lasting (but removable).

  • I may have found a workable solution, at least for anything that has a metallic lid. I've found you can use a magnet to attach a label to the lid. The small Mighty Magnets work pretty well and come in a variety of shapes (some are easier to grab than others). For the labels, the backside of the cardboard that's used for 6-packs works great -- I cut out 2"-diameter circles to fit nicely inside the decorative print on the mason lid. Still would love to hear other ideas though.

    (Camille Cloutier at April 12, 2011 12:43 pm)
0
Posted by wbremser (Questions: 0, Answers: 1)
Answered On April 25, 2011 4:56 pm

I use Weck jars

  • How does labeling work with the Weck jars?

    (Camille Cloutier at May 3, 2011 1:47 pm)
0
Posted by Oliver Hulland (Questions: 39, Answers: 59)
Answered On May 2, 2011 6:22 pm

I have no experience with canning, but you could order wider rubber bands and write labels in pen on those and slip them over the jar. The bonus is that if you place it at the widest point on the jar it will reduce clinking/breakage during storage. And they would be reusable!

Staples carries 1/4 pound of these 1/2" wide rubber bands for $2. (Anybody know why they measure rubber bands by weight?)

  • This is a great idea! Thanks, Oliver.

    (Camille Cloutier at May 3, 2011 1:46 pm)
0
Posted by Joe Stirt (Questions: 0, Answers: 7)
Answered On May 11, 2011 10:41 am

How about one of those pencils made to write on photographs?

0
Posted by Joe Stirt (Questions: 0, Answers: 7)
Answered On May 11, 2011 10:54 am

Yes, that's precisely what I meant: I couldn't think of the name off the cuff. Old age isn't pretty....

0
Posted by a person (Questions: 0, Answers: 1)
Answered On May 24, 2011 12:13 am

How about using a water-soluable pen (like an overhead pen) and a static cling label like the ones they use for oil-change reminders? They stick reliably in a pretty harsh environment (sun + hot) for 6+months and yet remove easily.

I'd write with the overhead pen, then cover it with the label to keep from smearing.

Office depot seems to sell inkjet-printable ones. I would worry that this would make the ink permanent rather than reusable, but maybe that is only on one surface or you could remove the ink-capturing coating (assuming it's a coating).

You could just print on the labels and reuse, if you can a specific set of items.

0
Posted by quail333 (Questions: 0, Answers: 1)
Answered On May 24, 2011 7:07 am

KISS-Just use a sharpie, it is a good compromise which is what you are asking for.

0
Posted by jmello (Questions: 0, Answers: 4)
Answered On May 25, 2011 7:29 am

We use day dots similar to these at my job. They are nice and adhesive, but also water-soluble, so they just magically go away in the dishwasher. These are the 1"x2" ones, but they have different sizes, and can be found online or in food service supply catalogs for cheaper.

https://www.daydots.com/article.asp?HKEY=002&strPRODH=001001009&strMATNR=11009-00-00&page=1

  • These look amazing! Are there any other uses outside of the food industry?

    (Oliver Hulland at May 25, 2011 7:35 am)
  • Interesting. My only concern is what happens to the labels after the come off in the dishwasher? Dont they gunk up the drain?? If the labels come off with a bit of faucet water, that might work.

    (Camille Cloutier at May 27, 2011 12:34 pm)
0
Posted by monty (Questions: 0, Answers: 1)
Answered On May 25, 2011 10:22 am

I use freezer tape. I find it is easy to remove because it doesn't tear like a label would. To make it even easier to remove just fold one end of the tape into a tab. It is adhesive, but it not difficult to remove which seems to be the primary intent of the question.

0
Posted by jessa (Questions: 0, Answers: 1)
Answered On May 25, 2011 4:48 pm

I would suggest grease pencil (aka china marker). It makes a waxy mark that won't go away if it just gets wet, but it can be removed with by rubbing with a paper towel and/or using a solvent after the mark has been on the glass for a long time.

0
Posted by brick66 (Questions: 0, Answers: 2)
Answered On May 26, 2011 4:13 am

sharpie can be removed with either acetone or alcohol (so use nailpolish remover or vodka)

0
Posted by brick66 (Questions: 0, Answers: 2)
Answered On May 26, 2011 4:14 am

Sharpie (permanent magic markers that write on glass) can be removed with acetone or ethanol so you write on the jar and remove with a cloth wet with nailpolish remover or vodka.

0
Posted by thebrandon (Questions: 0, Answers: 1)
Answered On May 26, 2011 12:29 pm

Sharpie on Gaff Tape. Removes easily and leaves no residue behind.

0
Posted by kokothetalkingape (Questions: 0, Answers: 17)
Answered On November 20, 2012 12:23 am

You said non-adhesive, but Post-It tape works well for me. It comes in a variety of widths, colors, and adhesive (super-sticky or regular.) Regardless of the type of adhesive, the tape peels off easily and cleanly. I have tried china markers and sharpies, but the markings are hard to read on clear glass without excellent lighting. In a cabinet with all the bottles and jars turned in various directions, the tape is far easier to read.

« Back to Previous Page