* Talk to me. Tell me a story. Share me a tip. * Support my work by buying my tips books (Vol. 1, Vol. 2). * Take out an Unclassified in this newsletter to reach fellow makers.
Pry Bar Tips and Tricks
Image from Family Handyman
Through an article in Family Handyman on pry bar tricks, I learned of something called an inflatable pry bar. Maybe this is a tool common to others, but I’d never heard of it, and now I think I need one in my life.
Beginner’s Tips for Using an Oscillating Multi-Tool
I recently broke down and bought my first oscillating multi-tool. If you’re also new to this strange-looking type of tool, here are 20 basic tips for getting more out of it. I especially agree with the tip about buying cheap accessories first, finding out which ones you use most often, and then investing in better quality versions. That’s what I did. Here’s a follow-up video on sharpening multi-tool blades. And the Project Farm video he refers to on the best multi-tool blades (TL;DR: Get the EZARC blades, $7.60 each in pack of 3).
Great Collection of Sewing Tips
I am working on a special project that has me going through the archives of Makezine.com. In doing so, I’m unearthing some gems, like all of the sewing tips that were posted over the years by Haley Pierson-Cox and others. Sewing is one of those foundational DIY skills that everyone should at least know the basics of (both hand and machine sewing).
Using a Hobby Polishing/Sanding Tool to Smooth 3D Prints
I have long been a huge fan of the Mr. Hobby Polisher Pro sanding tool. This is a simple (and a bit overpriced) battery-operated disc polisher/sander sold to the hobby market for sanding off sprue material and finishing models. It’s basically an electric toothbrush with a sanding disc head. The Polisher Pro comes with 3 sheets of sanding pads in 600, 800, and 1000-grit. There are 45 pads in all. I’ve had my tool for several years now, use it often in game modeling, and still have plenty of pads left. There are also replacement sanding pads available on Amazon (and there are pads available in other grits). This video introduces a use I hadn’t thought of: sanding layer lines and joins in resin and FDM 3D prints. The video doesn’t have a lot of content beyond that basic idea, but I was happy to discover another use for a tool I already own. I know many will say: Just use a Dremel tool! You can if you have a mini Dremel, but for modeling, this tool is better sized and not as aggressive as a Dremel. And, don’t be like the guy in the video. Always wear a mask when sanding resin and plastic.
The Creative Process in a Nutshell
1. This is awesome 2. This is tricky 3. This is shit 4. I am shit 5. This might be OK 6. This is awesome
This was posted on film/theater director Marcus Romer’sTwitter feed. This is a riff (to put it kindly) of an original list by Kazu Kibuishi. I like the above saltier expression of the idea, but your mileage may vary.
TOYS! Carhartt Work Shirts
For years, I’ve seen other people wearing Carhartt work shirts and for some reason never thought of buying one myself. I recently bought two, one in charcoal and one in denim blue. Man, do I like these shirts! Super well-made, comfortable, nice fabric, rugged, and good looking. And I love the pencil/pen slit in the right pocket. I think these shirt will be my go-to garment forever more. Carhartt work shirts are also available in women’s sizes.
Shop Talk
I got the following message from reader John Baglio. I don’t recall such a playlist crossing my transom, but it sounds great. If this rings anyone else’s bells, please message me.
“I was just thinking back over some of the better engineering videos I’ve seen in the past, and I was thinking of a playlist that I thought I saw in one of your newsletters. It was done by an engineer who I think was either Russian or Israeli and it was a whole series of pieces of wisdom for people fabricating parts. One of the things that I remember him saying was design captive hardware whenever possible. I was wondering if you might remember what that playlist was. If so, is there a way you could either send it to me or posted in one of your upcoming newsletters? I remember it being chock-full of amazing advice for fabricating parts.”
Become a Patron!Support our reviews, videos, and podcasts on Patreon!
Cool tools really work.
A cool tool can be any book, gadget, software, video, map, hardware, material, or website that is tried and true. All reviews on this site are written by readers who have actually used the tool and others like it. Items can be either old or new as long as they are wonderful. We post things we like and ignore the rest. Suggestions for tools much better than what is recommended here are always wanted.
This two-sided page contains the wisdom of an entire book on how to write better. Nay, it distills an entire shelf of the world’s greatest writing manuals (and I have them all). After 30 years as both a writer and editor I can’t think of much I would add to these 50 short tips. This PDF is now my favorite guide to writing well. You can print it out for free. If you want its pithy reminders fleshed out with more examples, see the book form, or the website. But the free tip sheet itself — one paper printed both sides — rewards a quick review anytime you get down to serious writing.. – KK
There’s an emerging new media I use more and more: an online summary of a conference. Known as liveblogging, it presents a synopsis of each presentation, talk-by-talk, in nearly real time. This saves you time and money traveling to distant cities, and suffering through introductions and equipment failures. At its best, reading the liveblog can be better than attending the talk. All the chaff has been winnowed, and almost every talk captured. (Most conference attendees don’t even get to every talk.) Video recordings of conferences are becoming more popular, but a good liveblog is much quicker to scan and digest. But at its worse, a liveblog will offer little more than snarky comments about the speaker.
At the creation end, you need some skills to separate the best from the worst. Ethan Zuckerman, of Geek Corp, is one of the best conference bloggers alive. He teamed up with Bruno Giussani, another star liveblogger, to produce this free short 6-page PDF booklet on how to blog a conference with effectiveness. When you blog a conference it forces you to pay attention. My first book Out of Control began as an online blog of every talk at the first Artificial Life Conference (although no one called it blogging in 1987). The requisite focus of summarizing each talk clarified many ideas for me, and the response to the “blog” of the conference encouraged me to write a book. Other livebloggers find the same. They listen harder, and remember more.
Get good at this and you have a free pass to many high-priced conferences. Organizers are increasingly looking for first-rate livebloggers to generate press and future attendees. Or, like Ethan you can generate your own audience who follow you because your liveblogging skills. – KK
It’s relatively easy to blog good and great speakers: They follow a narrative path through their talks and speak at a pace the audience can understand. It’s harder to blog inexperienced speakers(because they may be too technical, confusing, fast, etc.) and multispeaker panels (because the discussion can take many different unstructured turns). But you don’t need to transcribe the whole talk, you need to capture the gist of it. A 20-minutes talk can often be summarized in a 20-lines post.
Always remember that what you’re writing will be read by people who weren’t in the room, so they haven’t seen the slides, the video, or the gesture. Hence, you have to compensate for the lack of context. Don’t be afraid to create a narrative by saying “He shows a slide with data on …” or “She walks on stage carrying a big suitcase” or “He shows a YouTube video” etc. And if the speaker shows a YouTube video, or a picture, remember that you’re online: Open another browser window, go to YouTube, find that video, and link to it; or go to the speaker’s website, find that picture or another similar or related item, and link to it (or republish the picture within your post). Yes, this requires effective multitasking. It’s at the root of conference blogging.
Conferences usually give out a program ahead of time. Use it to prepare for blogging: Do a quick Google search for each speaker, and save (in the same text file) links to their sites, blogs, and the institutions they’re affiliated with; write a one-or-two-sentences “biography” for each; and for the speakers you’ve never heard of, try to get a general sense of who they are and what they do. To write the mini-biography, use also the speaker information distributed by the conference organizers (booklet, website, etc.). For the key speakers, save a picture on your laptop (from their websites) and pre-format it for Web use, in case you will need it. If you prepare sufficiently, you’ve got the first paragraph of each post almost written ahead of time.
This is the best thesaurus there is. It supplies more synonyms, analogs, parallels, equivalents and comparable words in English than any other source, online or off. No other thesaurus comes near to it for completeness or breadth. Compiled in dictionary form, like the one in your word processors, there’s no index or cross-referencing. Just look up a word, any word, and it proceeds to overwhelm you with alternative choices (a total of 1.5 million synonyms are presented in 1,361 pages), including short phrases and only mildly related words. Rather than being a problem of imprecision, the Finder’s broad inclusiveness prods your imagination and prompts your recall.
Its single downside, however, is a major frustration: it is not available digitally, in a form compatible to the way most people write these days. It should live on your computer in a pull-down option, or plug-in for Word or the like. I’m totally baffled why it is not. As it is, it’s a huge fat book — a great book! — sitting within arm’s reach when I write, but not near enough for the power that it offers. – KK
Image from Family Handyman
