Computers

Ambient Weather WS 2080

img

Home weather station

The Ambient Weather WS-2080 is a very full-featured weather station for the price. It uses a radio signal to communicate between the weather station and the display console, and updates the display every 48 seconds. The display shows a lot of information, and has a USB interface that allows a computer to capture the readings and create graphs from them. I haven’t used the USB interface yet, but it was one of the features that attracted me to this particular model.

It’s possible to adjust the calibration of the various sensors from the console, but for temperature it was close enough out of the box that I didn’t bother. We’ve had some rain a few times in the last month and it seems that the readings produced by the WS-2080 are on the low side, so I might end up calibrating the rain gauge. I did find the configuration procedure to be fairly confusing, with a lot of button-pushing to get to the various settings. You definitely want to have the manual in hand when you do it.

There is software that comes with the WS-2080 to configure it but it’s Windows-only and I have a Mac and Linux household so I haven’t used it. There is open source software for Linux that is supposed to be able to talk to the WS-2080 to capture the sensor readings, but I haven’t had a chance to try it yet.

I mounted the sensor pod on my TV antenna mast above the antenna, which puts it only about four feet above the roof; probably not the best place for the temperature sensor. I did buy the accessory solar radiation shield for the temperature sensor, but a better solution might have been to mount the temperature sensor in the shade on the north side of the house. The various parts of the weather station connect together with phone-cord-like wiring with RJ-11 connectors.

Over the past few months, I’ve been very happy with this Ambient Weather station.

-- David H. 01/8/13

© 2022