Using Bits of Left Over Molding Rubber to Volumize New Molds
In this Robert Tolene video, he offers a tip for saving on molding materials. He calls it “dunkin’ chunkies” — he cuts old mold pieces into small chunks and adds them into a new mold pour (in the areas where they won’t interfere with the object being molded).
Using a Shop Towel to Constrain Snipped Bits
From a Pask Makes video: When cutting/nipping bits of metal or other material that might fly away, line up your cut and then cover the workpiece with a towel before doing the cutting. This will prevent the waste pieces from flying all over your work area.
A Web App for Creating Project Boxes
Via Bob Clagett’s I Like to Make Stuff: MakerCase is a free web app that allows you to design boxes and project cases that can then be laser- or CNC cut. Once you’re satisfied with your design, MakerCase turns the model into an SVG or DXF file that can be sent to a laser cutter or CNC router.
Put Screws Back When Disassembling
Via this Tested video from Adam Savage: In disassembling parts you’ll be reassembling, rather than storing the hardware somewhere and then trying to remember where it all goes back, temporarily hand-screw it into the threaded part of the piece for safe keeping.
Here are some of my favorite tool mentions from the newsletter this year.
Recommended by reader Emory Kimbrough:
Titmus SW09R Livewire sealed glasses – they combine ANSI-rated impact protection with dust seals, a removable head strap that creates an even better seal against sneaky dust, and keeps the glasses from slipping down or slipping off at a bad moment. Finally, these were available with progressive lenses and in my strong prescription. Got mine with good customer service and prompt shipping from safetygearpro.com.
On the subject bit drivers, reader KokoTheTalkingApe, chimed in:
“My favorite is the Wiha Ultra Driver. It stores 13 double-ended bits in the handle, so it has 26 tips. The bits are stored in two rotating carousels that fan open when you pull them out. I don’t usually like proprietary bits, but these have held up well and replacements are readily available. The bitholder locks onto the bit. Made in Germany. Not ratcheting.”
Via Stumpy Nubs came this brilliant idea of wrapping your tool handles in stretchy, grippy hockey tape.
The iFixit electronics driver set is well thought out and designed, solidly built, with 64 bits of every configuration you’re likely to encounter: Slotted, Phillips, Torx, Torx Security, Square, Pentalobe, Hex, five nutdrivers, and more. There is also a flex extension shaft and the lid acts as a small parts sorting tray.
Mentioned in newsletter 118, at only $119, the Craftsman 7-¼” cordless circular saw is amazingly good for the price.
In issue 122, I included testing of folding knives by Todd at Project Farm. The surprise knife was the Kingmax at an amazing price of $13. And from an earlier Project Farm knife test: Smith & Wesson ($15.50).
This was the year I finally fell in love with Carhartt work shirts. Don’t know what took me so long. Also available in women’s sizes.
Need mechanical shop pencils? You want a FastCap FatBoy.
Maker Slang for 2022
I rounded up all of the content from the maker jargon and slang columns this year and did a Boing Boing post. You can see the entire list here. And last year’s list here.
Support This Newsletter, Buy My Merch
If you’re looking for great gift ideas for any maker on your shopping list, consider my two Amazon best-selling tips books (Volume 1, Volume 2). They are filled with tips on things like cutting, gluing, fastening, painting, finishing, electronics, soldering, 3D printing, hobby tips, and much more. The books are designed to appeal to DIYers of all skill levels and interest areas.
Become a Patron!Support our reviews, videos, and podcasts on Patreon!
Cool tools really work.
A cool tool can be any book, gadget, software, video, map, hardware, material, or website that is tried and true. All reviews on this site are written by readers who have actually used the tool and others like it. Items can be either old or new as long as they are wonderful. We post things we like and ignore the rest. Suggestions for tools much better than what is recommended here are always wanted.
This two-sided page contains the wisdom of an entire book on how to write better. Nay, it distills an entire shelf of the world’s greatest writing manuals (and I have them all). After 30 years as both a writer and editor I can’t think of much I would add to these 50 short tips. This PDF is now my favorite guide to writing well. You can print it out for free. If you want its pithy reminders fleshed out with more examples, see the book form, or the website. But the free tip sheet itself — one paper printed both sides — rewards a quick review anytime you get down to serious writing.. – KK
There’s an emerging new media I use more and more: an online summary of a conference. Known as liveblogging, it presents a synopsis of each presentation, talk-by-talk, in nearly real time. This saves you time and money traveling to distant cities, and suffering through introductions and equipment failures. At its best, reading the liveblog can be better than attending the talk. All the chaff has been winnowed, and almost every talk captured. (Most conference attendees don’t even get to every talk.) Video recordings of conferences are becoming more popular, but a good liveblog is much quicker to scan and digest. But at its worse, a liveblog will offer little more than snarky comments about the speaker.
At the creation end, you need some skills to separate the best from the worst. Ethan Zuckerman, of Geek Corp, is one of the best conference bloggers alive. He teamed up with Bruno Giussani, another star liveblogger, to produce this free short 6-page PDF booklet on how to blog a conference with effectiveness. When you blog a conference it forces you to pay attention. My first book Out of Control began as an online blog of every talk at the first Artificial Life Conference (although no one called it blogging in 1987). The requisite focus of summarizing each talk clarified many ideas for me, and the response to the “blog” of the conference encouraged me to write a book. Other livebloggers find the same. They listen harder, and remember more.
Get good at this and you have a free pass to many high-priced conferences. Organizers are increasingly looking for first-rate livebloggers to generate press and future attendees. Or, like Ethan you can generate your own audience who follow you because your liveblogging skills. – KK
It’s relatively easy to blog good and great speakers: They follow a narrative path through their talks and speak at a pace the audience can understand. It’s harder to blog inexperienced speakers(because they may be too technical, confusing, fast, etc.) and multispeaker panels (because the discussion can take many different unstructured turns). But you don’t need to transcribe the whole talk, you need to capture the gist of it. A 20-minutes talk can often be summarized in a 20-lines post.
Always remember that what you’re writing will be read by people who weren’t in the room, so they haven’t seen the slides, the video, or the gesture. Hence, you have to compensate for the lack of context. Don’t be afraid to create a narrative by saying “He shows a slide with data on …” or “She walks on stage carrying a big suitcase” or “He shows a YouTube video” etc. And if the speaker shows a YouTube video, or a picture, remember that you’re online: Open another browser window, go to YouTube, find that video, and link to it; or go to the speaker’s website, find that picture or another similar or related item, and link to it (or republish the picture within your post). Yes, this requires effective multitasking. It’s at the root of conference blogging.
Conferences usually give out a program ahead of time. Use it to prepare for blogging: Do a quick Google search for each speaker, and save (in the same text file) links to their sites, blogs, and the institutions they’re affiliated with; write a one-or-two-sentences “biography” for each; and for the speakers you’ve never heard of, try to get a general sense of who they are and what they do. To write the mini-biography, use also the speaker information distributed by the conference organizers (booklet, website, etc.). For the key speakers, save a picture on your laptop (from their websites) and pre-format it for Web use, in case you will need it. If you prepare sufficiently, you’ve got the first paragraph of each post almost written ahead of time.
This is the best thesaurus there is. It supplies more synonyms, analogs, parallels, equivalents and comparable words in English than any other source, online or off. No other thesaurus comes near to it for completeness or breadth. Compiled in dictionary form, like the one in your word processors, there’s no index or cross-referencing. Just look up a word, any word, and it proceeds to overwhelm you with alternative choices (a total of 1.5 million synonyms are presented in 1,361 pages), including short phrases and only mildly related words. Rather than being a problem of imprecision, the Finder’s broad inclusiveness prods your imagination and prompts your recall.
Its single downside, however, is a major frustration: it is not available digitally, in a form compatible to the way most people write these days. It should live on your computer in a pull-down option, or plug-in for Word or the like. I’m totally baffled why it is not. As it is, it’s a huge fat book — a great book! — sitting within arm’s reach when I write, but not near enough for the power that it offers. – KK